HRIS integration

HRIS integration

Overview

HRIS (Human Resources Information System) is a software solution that helps organizations manage and streamline their HR processes. Today, Brex supports 40+ HRIS integrations that customers can connect to — a list we’re continually expanding.

Connecting an HRIS software can help you automate the process of user and spend management as you scale. In terms of user management, HRIS integrations allow you to automate the act of adding, inviting, updating, or deactivating users and user details. HRIS integrations also help you with your spend management by automating spend limit assignment, syncing entities, providing insights into spending patterns, and connecting with your ERP.

Admins, and any other users with the Manage HRIS connection capability can use Brex’s HRIS Integration to manually or automatically invite users to their Brex accounts. This lets you invite a large group of full-time employees that you’ve already established in HRIS to your Brex account. After inviting them, you can still manage those employees’ details through your HRIS.

Brex will sync available fields when Merge, our HR integration partner, syncs data for the connected HR system, and will fall back to about every 12 hours.

Key HRIS features

  1. Auto-invite: Set up custom rules to determine who to invite from your HRIS based on attributes such as entity, department, title, etc. When configuring auto-invite you can configure the roles these users will have when invited. These rules will also apply to CSV uploaded users.
  2. Offboarding: You control when to remove employees; HRIS termination doesn’t revoke access unless you enable automatic offboarding. Deactivation revokes dashboard access and blocks spending on all active Brex cards, but doesn’t lock/cancel the cards, so they can be transferred if needed. Stipends and travel spend limits where the user is the sole spender close automatically.

Fields available to sync

When you sync up your organization to Brex via HRIS, we can store all of the following data attributes:

Note: Anything marked 'if available,' can only be synced if supported by your HR system and integration provider. Check this document to verify the current supported fields. If your integration provider doesn’t support mapping for a particular attribute, you can manually add the attributes after connecting your HRIS.

When an HRIS integration is active, the first name and last name synced from your HRIS map to the user's preferred name in Brex. These fields are controlled by the HRIS and update automatically on each daily sync. If a user's preferred name needs to be corrected and your account has an active HRIS connection, make the change in the HRIS system first.

Supported HRIS providers

Brex connects to your HRIS through Merge. Because provider names and logos come directly from Merge, the list of available integrations reflects what Merge currently supports.

Below, you can see a list of the current HRIS providers supported:

ADP Workforce Now, BambooHR, Charlie, Charthop, Dayforce, Deel, Freshteam, Gusto, Hibob, HR Cloud, HR Partner, Humaans, Justworks, Kallidus, Lano, Namely, Nmbrs, Oracle Cloud HCM, Paychex, Paycor, Paylocity, Personio, Proliant, Rippling, Sage HR, SAP SuccessFactors, Square Payroll, TriNet, TriNet HR Platform, UKG Pro, UKG Ready, and Workday.

Note: If your HRIS provider isn’t listed here, please reach out to Brex Support to confirm whether it’s supported and learn about connection options.

Rippling support

Connecting Rippling to Brex is managed by a Rippling-managed app in their marketplace. This integration uses Brex’s APIs and does not show up in Team settings.

Connect HRIS

Before you get started, make sure you have the appropriate permissions in both your Brex account and your HRIS. Once you’ve confirmed that, follow the steps below.

Step 1: In your Brex dashboard, click Team > Team settings > Connect your HRIS. Select one of the supported providers.
Step 2: You’ll be prompted to sign in with your HRIS login credentials. Enter these and follow the on-screen instructions to complete the connection process.

Step 3: Once your HRIS account has been authenticated, map additional fields. We’ll automatically sync any custom user fields from your HRIS system if you click Map fields.

Scroll to the bottom and click ‘+ Mapping’ on the left to configure which custom fields to sync to Brex. Select your field from your HRIS and enter the desired Brex field name and description for the field under New target field.

When completed, click Save.

Step 4: Your HRIS integration will sync your data. The first sync may take a while. You will receive an email notification once the sync is complete.

If you encounter any issues during the connection process, please reach out to Brex support for assistance.

Note: All active, full-time users on an HRIS system will be imported into Brex. If you would like to clean up your Team page experience, you may opt to archive users to hide them from view.

Step 5: Once connected, you can manage your HRIS integration by clicking > HRIS integration settings. Here, you can auto-invite and auto-deactivate users to Brex.

When you sync your legal entities, you’ll receive an email prompt to match the legal entities synced from your HRIS with the legal entities in your Brex dashboard.

To manage your custom user fields, go to Team > Fields library. Here, you can review and manage the enablement of your custom user fields.

Disconnect HRIS

To disconnect your HRIS, ensure you have Admin permissions and follow the steps below.

Step 1: Go to Team > [HRIS Provider] settings.

Step 2: At the top of the navigation, click the “...” menu beside [HRIS Provider] settings.

Step 3: Click Disconnect [HRIS Provider].

When you disconnect your HRIS, all employee information already stored in Brex will remain in your account, but any changes in your HRIS will no longer be synced going forward — including employee invitations and terminations. Employees invited prior to disconnecting will not be suspended.

Reconnecting your HRIS

In certain situations, your current HRIS connection might need to be updated. To update or reconnect it, ensure you have Admin permissions and follow the steps below.

Step 1: Go to Team > [HRIS Provider] settings.

Step 2: At the top of the navigation, click the “...” menu beside [HRIS Provider] settings.

Step 3: Click Reconnect [HRIS Provider].

Step 4: Follow the on-screen instructions to reconnect your HRIS system. Note: this can require re-entering credentials, URL, or other information.

Invite users

After you sync your HRIS, you can invite employees to Brex individually or in groups.

There are three different ways for account or card admins to add users to their Brex account. You can use any of the following methods at any time, and switch between them as you see fit.

For more information on inviting users, please refer to this help article.

  1. Email (single invite) Admins and any other users with the specific product capability can send an invitation to a single employee by email to help set up core users on the account.

  2. Auto-invite To help streamline the user invitation experience, you can set up rules to automatically invite new employees once they’ve joined your HRIS/SCIM or been uploaded via CSV.

  3. CSV upload Admins can also invite users via CSV upload if they have yet to integrate HRIS or do not integrate with HRIS at all.

Legal entity mapping

To map your HRIS legal entities with your Brex legal entities, follow the instructions below.

Step 1: Navigate to the Team page and click [HRIS provider] settings.

Step 2: Select Entity mapping from the navigation on the left side of the page.

Step 3: Here you’ll find HRIS-synced entities on the left and Brex-created entities on the right. You’ll want to map each HRIS-originated entity to a Brex entity, either by selecting an existing one or creating a new one (which will take you through entity verification).

Export CSV of users

If you want a snapshot of your entire team, or even just a handful of users, you can export a CSV report that summarizes their information.

Step 1: In your dashboard, go to Team.

Step 2: Click Download.

Step 3: Select your desired file output type.

Step 4: Click Download data.

Request cards for users

Account and card admins can't request a new physical card on behalf of other users, but can request to replace an existing one by following the steps below.

Step 1: Under Team, search for the cardholder using the search bar and click their name.

Step 2: Next to the Cards section in the user details on the right, click the 3 dots next to the card you want to replace.

Step 3: Click Replace.

You also have the option of assigning the user a new budget that they can use with their existing card if you’d like to better manage their spend.

Managing synced fields

HRIS supports syncing user fields, and those may be managed by following the steps below.

Step 1: Navigate to the Team page and click [HRIS Provider] settings.

Step 2: Click Synced fields to view all of the fields synced by your current HRIS provider.

Step 3: From here, you may opt to Disable field or Enable field.

Managing custom fields

HRIS now supports syncing custom user fields, which can be managed by following the steps below.

Step 1: Navigate to the Team > [HRIS provider] settings

Step 2: Click Synced fields to view all of the custom fields synced by your current HRIS provider.

Step 3: From here, you may opt to Disable field or Enable field.